Stain & Finishing Oil: The All-in-One Wood Finish
Transform and protect your wood in one easy step. Stain & Finishing Oil (SFO) is a professional-grade, all-in-one solution that serves as a wood conditioner, stain, and durable top coat.
This unique combination of natural oils and resins penetrates deep into the wood fibers, staining and sealing them simultaneously. The result is an incredibly durable, scratch-resistant, and waterproof finish that is perfect for high-traffic areas like tabletops, kitchen cabinets, and even flooring.
Unlike varnishes that form a film on the surface, SFO becomes a part of your wood. It accentuates the natural grain and beauty of your project, providing long-lasting protection from within.
Coverage Guide by Can Size
While actual coverage varies based on wood type and application, here is a general guide for raw, sanded wood:
-
237ml (8oz): Covers approximately 45–75 sq. ft.
-
946ml (Quart): Covers approximately 180–280 sq. ft.
-
3.78L (Gallon): Covers approximately 720–1120 sq. ft.
Remember: Softer woods absorb more product (lower coverage), while hardwoods absorb less (higher coverage).
How Wood Type Affects Your Finish
The type of wood you’re using is key to the final outcome. We always recommend doing a test patch on a hidden area to ensure you love the look.
-
Softwoods (Pine, Fir, Reclaimed Wood): These porous woods absorb more product, often resulting in a darker, more intense colour. You will likely have less excess oil to wipe away.
-
Hardwoods (Maple, Oak, Birch): These woods have a tighter grain and absorb less product, leading to a lighter, more uniform finish. Expect to wipe away more excess oil after application.
How to Apply Stain & Finishing Oil
1. On Bare or Sanded Wood:
Correct preparation is essential for a beautiful, even finish. SFO acts as the conditioner, stain, and topcoat all-in-one.
-
Step 1: Apply SFO generously to properly sanded, raw wood.
-
Step 2: Let it penetrate for 15-20 minutes.
-
Step 3: Using a clean cloth, buff away all the excess oil from the surface.
-
Step 4: For full protection and depth of colour, a minimum of two coats is required. Allow 9 hours of drying time between coats.
2. Over Previously Painted Surfaces (Faux Finishes):
Create stunning faux wood grain or aged effects over a painted base.
-
Apply SFO in a very thin layer.